淄博很多新楼盘和厂房改造，瓷砖贴得挺讲究，非常后卡在电梯口——门套一上墙，不是阴阳角对不齐，就是瓷砖完成面和门套打架，工人拿玻璃胶一圈补缝，越看越像临时工干的。

Many new buildings and factory renovations in Zibo are meticulously tiled, and eventually get stuck at the elevator entrance - when the door frame is placed on the wall, either the internal and external corners are not aligned, or there is a fight between the tile finish and the door frame. Workers use glass glue to fill the gaps, making it look more and more like a temporary worker.

选厂家的第一件事，不是比单价，而是看它会不会“按洞口出图”。电梯门洞、墙厚、瓷砖完成面、呼梯盒位置，四个数建议一起量。先贴砖后量门套，十有八九要现场改尺寸，折边一重做，色差就出来了。

The first thing to do when choosing a manufacturer is not to compare the unit price, but to see if it can "produce drawings according to the opening". The elevator door opening, wall thickness, ceramic tile finish, and call box position must be measured together. First tiling and then measuring the door frame, it is highly likely that the size will need to be changed on site. Once the folding is redone, the color difference will appear.

材质上别被“不锈钢”三个字糊弄：

Don't be fooled by the three words' stainless steel 'on the material:

室内公区用304拉丝，实厚1.2mm起步；首层、地下车库人流量大，直接1.5mm。

Indoor public areas use 304 brushed wire, starting from a solid thickness of 1.2mm; The first floor and underground garage have a high pedestrian flow, directly 1.5mm.

201材质便宜三成，但淄博冬夏湿冷交替，半年就开始起雾斑，别拿质保换差价。

201 material is 30% cheaper, but Zibo experiences alternating wet and cold seasons in winter and summer, and fog spots begin to appear within six months. Don't trade the warranty for the price difference.

想轻一点、颜色多，选铝合金电泳或石塑装配式线条，但承重角位别省，阳角建议整料折弯，不接受拼接。

If you want to be lighter and have more colors, you can choose aluminum alloy electrophoretic or stone plastic assembly lines, but the load-bearing angle position is different. The male corner must be bent as a whole and splicing is not accepted.

安装工艺看三处就懂行：

You can understand the installation process by looking at three aspects:

基层不用木龙骨打底，改防火木塑板或镀锌骨架，防潮防火，验收不卡壳。

The base layer does not require wooden keel as a base, but instead uses fire-resistant wood plastic board or galvanized skeleton, which is moisture-proof and fire-resistant, and does not get stuck during acceptance inspection.

垂直度用激光投线仪控，2米偏差≤2mm，门缝留1.5–3mm再打中性硅酮胶。

Verticality is controlled by a laser projection instrument, with a 2-meter deviation of ≤ 2mm. Leave a gap of 1.5-3mm at the door before applying neutral silicone adhesive.

阳角做45°碰角或整料折弯，别用直角拼装糊弄，后期开裂全在阴角。

Make a 45 ° collision angle or whole material bending for the external corner, do not use right angle assembly and paste, as all cracks will occur in the internal corner in the later stage.

合同里把“材质牌号、实厚、表面工艺、测量出图责任、售后几年”写死，比砍下来两百块单价有用得多。

Writing down "material grade, thickness, surface craftsmanship, responsibility for measuring and drawing, and years of after-sales service" in the contract is much more useful than cutting the unit price by 200 yuan.

本文由淄博电梯门套厂家友情奉献.更多有关的知识请点击:http://www.sddtmt.com我们将会对您提出的疑问进行详细的解答，欢迎你登录网站留言.

This article is a friendly contribution from Zibo Elevator Door Frame Manufacturer For more information, please click: http://www.sddtmt.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message