电梯门套是现代社会不可缺少的必需品！分为小门套和外包大门套。小门套为一般出厂标配，大门套则用在是包覆小门套之外到电梯外呼键之间墙体部分。

Elevator door frames are an indispensable necessity in modern society! Divided into small door frames and outsourced large door frames. The small door frame is a standard factory accessory, while the large door frame is used to wrap around the wall between the small door frame and the elevator call button.

作为人流量较大且电梯运行存在巨大风压的井道外墙保护装饰，所以建议满足以下条件：

As a protective decoration for the exterior walls of a well with high pedestrian flow and significant wind pressure during elevator operation, the following conditions must be met:

1.防水阻燃：

1. Waterproof and flame retardant:

电梯为特种设备，在火灾情况下电梯是不允许使用的，但是电梯门套作为楼梯厅内重要部分，一定要达到相应阻燃要求（V0或以上），从而提高整体的消防等级；同理，若遭遇潮湿环境或被水泡情况，需达到浸水中泡 不变形不开裂，以增强整体环境的 性。

Elevators are special equipment and are not allowed to be used in case of fire. However, as an important part of the stairwell, the elevator door frame must meet the corresponding flame retardant requirements (V0 or above) to improve the overall fire protection level; Similarly, if encountering a humid environment or being soaked in water, it is necessary to ensure that the water does not deform or crack during immersion, in order to enhance the overall environmental performance.

2.抗撞击强度：

2. Impact resistance strength:

电梯轿厢门在《GB7588-2003》中规定要求在5cm*5cm的范围内，静力300N、撞击力1000N（约等于正常成年人所能施加的作用力，那么作为电梯门套应具备同等耐撞击程度，以防止提重物、或电动车、自行车等进出电梯时撞击发生损坏和意外。

According to GB7588-2003, the elevator car door is required to have a static force of 300N and an impact force of 1000N within a range of 5cm * 5cm (approximately equivalent to the force that a normal adult can apply). Therefore, as an elevator door frame, it should have the same level of impact resistance to prevent damage and accidents caused by collisions when lifting heavy objects, electric vehicles, bicycles, etc. enter and exit the elevator.

3.使用寿命：

3. Service life:

作为公众设施，每天出入电梯人员/货物等众多，会对电梯门套造成很大的损伤和磨擦。对于电梯门套的材质需达到更高标准要求，以提高其使用寿命，电梯的使用寿命不少于16年，门套作为其组成部分，应尽量达到与电梯同寿命使用。

As a public facility, there are many people/goods entering and exiting the elevator every day, which can cause significant damage and friction to the elevator door frame. The material of the elevator door frame needs to meet higher standards to improve its service life. The service life of the elevator should not be less than 16 years, and the door frame, as a component of it, should strive to achieve the same service life as the elevator.

4. ：

4. ：

作为公众场合进出人群密集之处， 问题是重中之重。电梯门套建议要达到受破坏力撞击后破裂损坏无 隐患，甚至永不脱落不至于危害或损坏生命财产。

As a densely populated area for entering and exiting public places, the problem is of utmost importance. The elevator door frame must be able to break and damage without any hidden dangers after being impacted by destructive forces, and even never fall off without endangering or damaging life and property.

5.环保：

5. Environmental Protection:

电梯门套面积小，却数量庞大，在环保为主题的现代社会，一定要呼吁环保材质的多方面应用。为祖国大好河山和 绿色贡献一己之力。

The elevator door frames have a small area but a large quantity. In the modern society with environmental protection as the theme, it is necessary to call for the multi-faceted application of environmentally friendly materials. Contribute one's own efforts to the great rivers, mountains, and greenery of our motherland.

6.工序简便：

6. Simple process:

因人工成本日益提高，应运而出多种快捷组装式建筑、家具和电梯门套等产品，不仅节省了工时、人工成本，也相应减少了工序，从而达到 节能的工作效率来适应现代社会的要求

Due to the increasing cost of labor, a variety of quick assembly building, furniture, and elevator door frames have emerged to meet the demands of modern society. This not only saves labor hours and costs, but also reduces the number of processes, achieving energy-saving work efficiency to meet the requirements of modern society