电梯门套

　　elevator door frame

　　有很多种材质的选择

　　There are many material choices available

　　但最耐用又高档的就是

　　But the most durable and high-end one is

　　用天然不锈钢

　　Using natural stainless steel

　　不锈钢电梯门套不但坚固的硬度

　　Stainless steel elevator door frames not only have strong hardness

　　在昼夜温差较大的环境下

　　In an environment with a large temperature difference between day and night

　　也十分的耐用

　　It is also very durable

　　不会因为温度变化频繁

　　Not due to frequent temperature changes

　　而产生变形

　　And produce deformation

　　天然不锈钢不论是质感还是花色，都有非常多的选择。无论装修在家里或者是公司里，都是非常好的选择。

　　Natural stainless steel offers a wide range of choices in terms of texture and color. Whether decorating at home or in the office, it is a great choice.

　　现在一些三层的独立别墅都装上了电梯，而天然不锈钢电梯门套的耐用性美观性也受到了消费者的喜爱。

　　Nowadays, some three story independent villas are equipped with elevators, and the durability and aesthetics of natural stainless steel elevator door frames have also been favored by consumers.

　　1、电梯门套线是沿电梯门洞的四周（没有顶到楼层的顶部）

　　1. The elevator door frame line runs around the elevator door opening (without reaching the top of the floor)

　　电梯套的测量跟门窗套方法基本上是一样的，之所以单独的将电梯套提出来讲，因为电梯套的尺寸是由原建筑的电梯洞口和电梯门框共同决定的，这是与门窗套的尺寸测量最大的区别。

　　The measurement of elevator covers is basically the same as that of door and window covers. The reason why elevator covers are mentioned separately is because the size of elevator covers is determined by the original building's elevator openings and door frames, which is the biggest difference from the measurement of door and window covers.

　　1、电梯门套线是沿电梯门洞的四周（没有顶到楼层的顶部）

　　1. The elevator door frame line runs around the elevator door opening (without reaching the top of the floor)

　　这是最常规最基本的电梯套施工方式，简单的都让人不想去叙述。可是正是因为能把最基本的问题想明白了，我们面对非常规才能更游刃有余。

　　This is the most common and basic construction method for elevator sets, which is so simple that people don't want to describe it. But it is precisely because we can understand the most basic problems that we can face unconventional situations more easily.

　　由于电梯门框的尺寸是固定的，就决定了两个侧板之间的距离也是固定的。

　　Due to the fixed size of the elevator door frame, the distance between the two side panels is also fixed.

　　顶板的长度也就是两个侧板之间的距离加上两块侧板的厚度。侧板的高度也是由电梯门框的高度决定的，和门框的高度一样高。侧板和顶板的宽度，要在门洞的上中下取三个点去量电梯门框到墙壁的最外侧的距离，取它们当中最大的距离作为电梯侧板和顶板的宽度。

　　The length of the top plate is the distance between the two side plates plus the thickness of the two side plates. The height of the side panel is also determined by the height of the elevator door frame, which is the same height as the door frame. The width of the side panel and top panel of the elevator should be measured by taking three points above, below, and in the middle of the door opening to measure the distance from the elevator door frame to the outermost side of the wall. The maximum distance between them should be taken as the width of the elevator side panel and top panel.

　　电梯门套线的宽度必须要能完全的把墙壁和侧板之间的距离遮住。

　　The width of the elevator door frame line must be able to completely cover the distance between the wall and the side panel.

　　电梯门套线的长度就是电梯侧板的高度加上线条本身的宽度，当然线条的长度可以适当的放长几公分，防止工人现场施工切45度角时出现失误，长一点还可以切成短的，短的就再也不能变成长的了。有的时候门套线的下方还会有个小脚座，宽度和线条相同，高度不定。这时线条的长度就再减去脚座的高度。

　　The length of the elevator door frame line is the height of the elevator side panel plus the width of the line itself. Of course, the length of the line can be appropriately extended by a few centimeters to prevent workers from making mistakes when cutting at a 45 degree angle during on-site construction. If it is longer, it can be cut into shorter ones, and the shorter ones can never become longer. Sometimes there is a small footrest below the door frame line, with the same width as the line and varying height. At this point, subtract the height of the footrest from the length of the line.

　　2.电梯门套直接到顶

　　2. The elevator door frame goes directly to the top

　　图1的电梯套沿门洞四周粘贴，那么门洞四周的墙面肯定在同一垂直平面上，而现在这种线条到顶的方式就得分两种情况了。

　　The elevator cover in Figure 1 is pasted around the door opening, so the walls around the door opening must be on the same vertical plane. Now, this line to the top method can be divided into two situations.

　　第一种：图中阴影部分是原建筑墙面（也可以理解成，施工方为了节约材料没在阴影处贴瓷砖，和不锈钢面板重复了。所以阴影处相当于四周的墙壁是凹进去的）。

　　The first type: The shaded area in the picture is the original building wall (which can also be understood as the construction party not tiling the shaded area to save materials, and repeating it with the stainless steel panel. Therefore, the shaded area is equivalent to the surrounding walls being recessed).

　　这种情况对我们确定面板的尺寸是有利的，面板的作用就相当于用瓷砖把阴影部分填平，使门套四周再处于同一垂直面。门套线条是可以压着面板的。所以面板的长度不大于两侧瓷砖之间的距离，并且不小于电梯套两侧板之间的距离。

　　This situation is advantageous for us to determine the size of the panel. The function of the panel is equivalent to filling the shaded area with tiles, so that the door frame is in the same vertical plane around it. The door frame lines can be pressed against the panel. So the length of the panel should not be greater than the distance between the tiles on both sides, and not less than the distance between the panels on both sides of the elevator cover.

　　面板的宽度就是用总高减去电梯门框的高度，这是面板最宽的宽度，因为顶部的电梯套线条是压着它的，所以面板的宽度还可以减少，但是不能减少的超过线条的宽度。侧板和顶板的长和宽和1中的测量方法是一样的。在此不在赘述。

　　The width of the panel is calculated by subtracting the height of the elevator door frame from the total height. This is the widest width of the panel, as the top elevator cover line is pressed against it. Therefore, the width of the panel can be reduced, but it cannot be reduced beyond the width of the line. The length and width of the side panel and top panel are measured using the same method as in 1. I won't elaborate here.

　　第二种：就是图中的阴影部分和四周处于同一垂直面（简单理解就是贴了瓷砖了），这时电梯门套线条就不能再压着面板了，如果要压着了，就相当于把线条从墙上抬高了一段距离（这个距离可以想成是面板的厚度18加上胶口厚度6）.线条和墙壁之间就需要用收口条收口。

　　The second type is when the shaded area in the picture is in the same vertical plane as the surrounding area (simply understood as being tiled). At this point, the elevator door frame line can no longer press against the panel. If it needs to be pressed, it is equivalent to raising the line a certain distance from the wall (this distance can be thought of as the thickness of the panel 18 plus the thickness of the adhesive opening 6) The gap between the line and the wall needs to be sealed with a sealing strip.

　　想想两三公分的长条会出现多高的损耗，而且增加了施工难度，同时侧板和顶板的宽度也要随之增加。

　　Think about how much wear and tear would occur with a two to three centimeter long strip, and how it would increase the difficulty of construction. At the same time, the width of the side panels and top panels would also need to increase accordingly.

　　所以这种情况下面板的尺寸要很精确才行。它的长度就是两块侧板之间的距离，也就是电梯门框的宽度，它的高度就是用地面距顶的总高度减去电梯门框的高度再减去门套线条的宽度。

　　So in this case, the size of the panel needs to be very precise. Its length is the distance between two side panels, which is the width of the elevator door frame. Its height is calculated by subtracting the height of the elevator door frame from the total height from the ground to the top, and then subtracting the width of the door frame line.

　　或者用电梯门框距顶的高度减去门套线条的宽度。而且在施工时要向施工负责人明确粘贴时首先要固定好面板的位置，这样就等于是给两个侧板的间距固定了，才不会因为侧板安装时它们之间距误差影响到面板，否则别人又会说是面板的尺寸下小了，其实是因为施工的顺序搞错了。

　　Or subtract the width of the door frame line from the height of the elevator door frame from the top. And during construction, it is necessary to clarify to the construction manager that the position of the panel must be fixed first when pasting, which is equivalent to fixing the distance between the two side panels, so as not to affect the panel due to the distance error between them during installation. Otherwise, others may say that the size of the panel is too small, but in fact, it is because the construction sequence is wrong.

　　或者怕麻烦的情况下，就和施工负责人商量，把面板的尺寸按照1中的情况测量，把尺寸放大一点，施工的时候，等到门套线贴上去之后，现场量好两根门套线条之间的距离和顶板距顶部门套线条的距离，再手工切割。

　　If you are afraid of trouble, you can discuss with the construction manager to measure the size of the panel according to the situation in 1, enlarge the size a little, and during construction, after the door frame line is pasted, measure the distance between the two door frame lines and the distance between the top plate and the top department line on site, and then manually cut.

　　手工切割也有技巧，在不锈钢见光面贴上美纹纸，画好线，然后切割，这样可以减少崩边的发生。

　　There are also techniques for manual cutting, such as pasting decorative paper on the visible surface of stainless steel, drawing lines, and then cutting, which can reduce the occurrence of edge breakage.

　　本文由  河北工地电梯门套上门安装厂家 友情奉献.更多有关的知识请点击  http://www.sddtmt.com/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from the on-site installation manufacturer of elevator door frames at a construction site in Hebei For more related knowledge, please click http://www.sddtmt.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.