济南诚耐

济南诚耐金属制品有限公司

不断发展技术力量、完善的设计服务团队,真诚为您提供的服务

全国咨询热线
15990909037
当前位置:首页 »资讯中心 » 常见问题 » 安装门套有缝隙?教你一招解决

安装门套有缝隙?教你一招解决

来源:http://www.sddtmt.com/ 浏览:发表时间:2022-12-19
我们在室内装修安装门套时,经常会发现门套与墙面之间,会有缝隙,那么这种缝隙该怎么处理呢?
When we install door jambs in the interior decoration, we often find gaps between the door jambs and the wall. How to deal with such gaps?
室内装修门套装好后与墙面有缝隙该怎么办?
What should I do if there is a gap between the interior decoration door and the wall after it is installed?
首先要排除你家门洞两边的墙是否不平整,门套与墙面缝隙平均在2.公分及以内的,都是正常的,这样可以调整门的安装误差。平均缝隙超过2.5公分就是测量尺寸有误差是不正常的!
First, it should be ruled out whether the walls on both sides of your door opening are uneven. It is normal that the gap between the door jamb and the wall is 2 cm or less on average. This can adjust the installation error of the door. If the average gap is more than 2.5 cm, it is abnormal to measure the size with error!
处理方法;缝隙大小看墙体垂直程度,这个缝隙可以打玻璃胶,也可以油漆批腻子来补就可以了,否则门的安装就不坚固。会出现晃动,时间长了就会导致开裂等安全隐患!
Treatment method; The size of the gap depends on the verticality of the wall. The gap can be filled with glass glue or paint and putty, otherwise the door will not be firmly installed. There will be shaking, and a long time will lead to cracks and other potential safety hazards!

如果缝隙很大,那就是墙体不平整!可以选择在缝隙处填砖或者水泥浆,这样才能保证墙体与门框缝隙结实不透。这一般是安装完后的补救办法,就是在测量时把握好尺寸,尽量保持缝隙在1-2公分以内!墙面不平是很常见,所以我们在装修时,一定要提前考虑解决掉,否则会给后面的施工带来影响
If the gap is large, the wall is uneven! The joints can be filled with bricks or cement mortar to ensure that the joints between the wall and the door frame are firm and impermeable. This is generally a remedy after installation, that is, when measuring, grasp the size and try to keep the gap within 1-2 cm! Uneven walls are very common, so we must consider to solve them in advance when decorating, otherwise it will affect the later construction
门框和门的尺寸不匹配,或门框与墙之间安装处理不当,很可能会出现缝隙。缝隙比较小的业主可以自己在门下面贴橡胶条来处理,如果门底部缝隙太大建议找装修师傅更换。
The size of the door frame and the door does not match, or the installation between the door frame and the wall is improper, which may lead to gaps. Owners with small gaps can stick rubber strips under the door to deal with the problem. If the gap at the bottom of the door is too large, it is recommended to find a decorator to replace it.
总结;安装门后一般都是会有缝隙,只要不超过正常的标准,打玻璃胶油漆批腻子都可以修补好!
Summary; After the door is installed, there is usually a gap. As long as it does not exceed the normal standard, it can be repaired with glass glue, paint and putty!
以上就是为大家介绍的有关济南铝合金门套的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sddtmt.com
The above is a detailed introduction to Jinan aluminum alloy door pocket, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.sddtmt.com