Let's first take a look at some details of stone door jambs:

1、石材门套一般包含石材门套线条、内侧平板、脚座这三部分组成；2、门套一般的高度是根据门洞来定的，不过一般都在2000mm以上；

1. Stone door jambs generally consist of three parts: stone door jamb lines, inner flat plates, and foot seats; 2. The general height of the door pocket is determined based on the door opening, but it is generally above 2000mm;

3、石材门套线和内侧平板一般为压盖方式，也就是现场安装时来组合而不是厂里组合加工好，会存在拼缝；

3. The stone door frame line and inner flat plate are generally covered by pressing, which means they are assembled during on-site installation rather than being processed in the factory, and there may be seams;

4、石材的板面不一定可以满足单边长度的要求，所以在垂直方向和水平方向就需要分断，这就会增加现场安装的拼缝；

4. The board surface of the stone may not necessarily meet the requirements of single side length, so it needs to be broken in the vertical and horizontal directions, which will increase the number of joints installed on site;

5、门套线在转角位置会碰角，这个位置也会增加拼缝；

5. The door pocket line will collide at the corner position, and this position will also increase the seam;

6、石材在运输和安装过程中会不可避免地出现断裂和缺角的问题出现；

6. During transportation and installation, stone materials will inevitably experience fractures and missing corners;

7、石材本身亮度和在厂里加工中打磨不够时的加工位置的亮度不足。

7. The brightness of the stone itself and the brightness of the processing position when it is not polished enough in the factory are insufficient.

石材门套线与侧板压盖缝隙

Gap between stone door pocket line and side plate cover

在了解了石材门套的一些细节之后，就会知道石材安装完成之后会有比较多的问题，使得其达不到较好的装饰效果，这就需要来做晶面处理。石材门套线的拼缝，接缝，断裂，缺角，磨损等的问题都可以通过镜面处理来。而一般的石材安装师傅只会简单地打磨，而不能很细致地去做晶面处理，所以就需要的石材晶面打磨师傅来做晶面处理。

After understanding some details of the stone door jamb, you will know that there will be many problems after the installation of the stone, which makes it unable to achieve a good decorative effect. Therefore, it is necessary to perform crystal surface treatment. The problems of stitching, seams, fractures, missing corners, and wear on the stone door cover line can be solved through mirror treatment. However, ordinary stone installers only perform simple polishing and cannot perform crystal surface treatment very meticulously, so professional stone crystal surface polishing masters are needed to perform crystal surface treatment.

石材门套晶面处理的效果：

The effect of crystal surface treatment on stone door jambs:

1、拼缝，接缝位置重新调胶打磨，使得缝隙位置和其他部分一致且亮度一致；

1. Splicing, re glue and polish the seam position to ensure that the seam position is consistent with other parts and the brightness is consistent;

2、石材断裂和缺角位置修补完整且一致；

2. Complete and consistent repair of stone fractures and missing corners;

3、所有缝隙处理完成。

3. All gaps have been processed.

因此石材门套在安装完成之后都需要单独做晶面处理，这可以很好地保证石材门套安装完成的实际效果。

Therefore, after the installation of the stone door jamb, it is necessary to perform a separate crystal surface treatment, which can effectively ensure the actual effect of the installation of the stone door jamb.