不锈钢电梯门套多少钱 作用和如何安装
现在房价是越来越高了,很多买了房的朋友都想把自己的房子装修的很漂亮。尤其是门套是装修最重要的。我想很多朋友对门套都不是非常的熟悉,甚至有的朋友都不知道门套是什么。其实门套就是一种建筑装潢术语.是指门里外两个门框。也有直接称作门框的。不同的人爱好不一样,所选择的门套也是不一样。下面小编就详细给大家分享有关于门套的内容。希望对大家有所帮助。
Nowadays, housing prices are getting higher and higher, and many friends who have bought a house want to decorate it beautifully. Especially the door frame is the most important aspect of decoration. I think many friends are not very familiar with door frames, and some even don't know what a door frame is. Actually, door frame is a term used in architectural decoration It refers to the two door frames inside and outside the door. There are also those directly called door frames. Different people love different things, and the door frames they choose are also different. Below, the editor will share with you in detail the content related to door frames. I hope it is helpful to everyone.
门套多少钱一米
How much is the door frame per meter
门套是一种建筑装潢术语,是指门里外两个门框。也有直接称作门框的。而无纺布门套,是一种多用在装修装満过程中为防止门受损而设计的门的保护套。原木门套大概300元到500元一米,而实木门套价格是300元到1000元一米。
Door frame is a building decoration term that refers to two door frames inside and outside a door. There are also those directly called door frames. Non woven door frames are a type of protective cover designed to prevent damage to doors during decoration and installation processes. Wooden door frames cost approximately 300 to 500 yuan per meter, while solid wood door frames are priced at 300 to 1000 yuan per meter.
门套的作用
The function of door frames
原来的作用是为了固定门扇和保护墙角(因为以前的墙面没有或很少有现在这样高质量的墙面漆,是需要保护的)。
The original function was to fix the door leaf and protect the wall corner (because previous walls did not have or rarely had high-quality wall paint like now, which needed protection).
但是现在这种问题已经不存在了,也就失去了实际功能需要,而变成了一种纯个人审美的需求
But now this problem no longer exists, and it has lost its practical functional needs, becoming a purely personal aesthetic need
常用在装修装潢过程中,用来保护门免受刮伤、腐蚀、破损、脏污等,一般是量身定做,上面印有装修装潢公司的基本信息,以便广告宣传,质地环保,物美价廉。
Commonly used in the decoration process to protect doors from scratches, corrosion, damage, dirt, etc., it is usually tailored and printed with the basic information of the decoration company for advertising purposes. The texture is environmentally friendly and cost-effective.
门套如何安装
How to install the door frame
如果是传统方式--现场制作的门套,是由现场装饰工人直接用钉子固定在门洞的墙体,而如果是成套门产品的门套安装(现在越来越多的用户均采用成套门产品),则要考虑两个问题:
If it is the traditional way - on-site production of door frames, which are directly fixed to the wall of the door opening by on-site decoration workers with nails, while if it is the installation of door frames for complete door products (more and more users now use complete door products), two issues need to be considered:
一是相应的成套门产品,其门套的技术结构是否符合作为成套门产品所须具备的牢固性、精准性以及稳定性这二大技术特征:
One is whether the technical structure of the door frame of the corresponding complete set of door products meets the two major technical characteristics of firmness, accuracy, and stability required as a complete set of door products:
二是成套门安装者对于安装现场的事先勘测与安装时的工艺流程的规范性(如采用发泡剂等方式对于门套牢固性、精准性和日后使用的稳定性所有可能产生的影响)。
The second is the standardization of the pre survey and installation process of the installation site by the complete door installer (such as the use of foaming agents and other methods that may have an impact on the firmness, accuracy, and stability of the door frame for future use).
1、根据设计图纸检查门的规格、开启方向、相关配件等
1. Check the specifications, opening direction, and related accessories of the door according to the design drawings
2、用卷尺量门洞的高与宽。门的标准高宽尺寸是200cmx80cm;卫生间的门高宽是200cmx70cm。尺寸如有出入要及时纠正,
2. Measure the height and width of the door opening with a tape measure. The standard height and width dimensions of the door are 200cmx80cm; The height and width of the bathroom door are 200cmx70cm. If there is any discrepancy in size, it should be corrected in a timely manner,
一侧门洞两条垂直线。3、测量位置线,确定门框的位置,用墨斗弹拉出垂直线
Two vertical lines on one side of the door opening. 3. Measure the position line, determine the position of the door frame, and use an ink fountain to pull out the vertical line
4、在垂直线上用冲击钻打眼,孔眼与孔眼之间的距离约为30cm,一侧门两排共10个孔眼。冲击钻的钻头应为12mm,所钻孔眼深度约为6cm。
4. Drill holes with an impact drill on the vertical line, with a distance of about 30cm between each hole. There are a total of 10 holes in two rows on one side of the door. The drill bit of the impact drill should be 12mm, and the depth of the drilled hole should be about 6cm.
5、将小木楔用铁锤逐个钉入孔眼,以便固定门框板。小木楔的体积大小为5cmx1.5cmx1.5cm,以落叶松制作的为好,因为落叶松的木质结构紧,不容易松动。
5. Nail the small wooden wedges into the holes one by one with a hammer to secure the door frame panel. The volume size of the small wooden wedge is 5cmx1.5cmx1.5cm, and it is better to make it from larch because the wood structure of larch is tight and not easy to loosen.
6、开料制作门框。左右做两侧门框龙骨的木工板尺寸为200cmx 3cmx8cm,门框顶龙骨的木工板尺寸为80cmx3cmx8cm。将高密度九厘板涂胶粘在龙骨上,再用汽枪钉固定,
6. Cutting materials to make door frames. The size of the wooden board for the left and right door frame keels is 200cm x 3cm x 8cm, and the size of the wooden board for the top keel of the door frame is 80cm x 3cm x 8cm. Apply glue to the high-density 9cm board and stick it to the keel, then fix it with air gun nails,
7、将制作好的三条门框按门的形状连接起来,并且用大钉子在接合处固定
7. Connect the three pre made door frames according to the shape of the door and fix them at the joint with large nails
8、用刨子将连接好的门框表面修平整,修整边角,棱角分明。
8. Use a planer to smooth the surface of the connected door frame, trim the edges and corners, and make them sharp and angular.
9、将门框放到门洞上,按墙面的水平线为准,门框下拿木头或者砖头垫起,调节门框的高度。下面预留5cm埋在地板的龙骨中。
9. Place the door frame on the doorway, aligning it with the horizontal line of the wall. Use wood or bricks to support the frame and adjust its height. Reserve 5cm below to be buried in the keel of the floor.
10、在门框的上面钉一个钉子,把线垂挂上,通过线垂来调整门框的垂直,一边衡量一边用麻花钉将门框固定在门洞上。
10. Nail a nail on the door frame, hang the line vertically, adjust the verticality of the door frame through the line verticality, and use Fried Dough Twists nails to fix the door frame on the door opening while measuring.
11、制作门脸的线条。门脸可以是现成买的,也可以是施工人员按照图纸做出来的。制作完成后,就把门脸固定到门框上六,这样门套就基本完成了
11. Create the lines for the door face. The storefront can be purchased ready-made or made by construction personnel according to the drawings. After the production is completed, fix the door face to the door frame six times, so that the door frame is basically completed
12、把门放到门套上比划好,确定合页在门套上的具体位置,再按合页的厚度切出口径。也切出锁套的口径。将门安装到门套上,合页用锣丝刀将锣丝钉拧紧。注意门与门套的间不得大于1.5mm,以顺畅开关门为准。
12. Mark the door on the door frame, determine the specific position of the hinge on the door frame, and then cut the diameter according to the thickness of the hinge. Also cut out the diameter of the lock sleeve. Install the door onto the door frame, and use a gong wire knife to tighten the gong wire nails on the hinges. Note that the distance between the door and the door frame should not exceed 1.5mm, and the smooth opening and closing of the door should prevail.
13、清除门套表面的附着物及灰尘赃物,然后涂腻子。在涂腻子前先在门脸与墙面之间贴上美文纸,防止喷涂油漆时沾到墙面上。涂腻子时一定要均匀,修补好门套上钉眼。
13. Remove the attachments and dust on the surface of the door frame, and then apply putty. Before applying putty, stick art paper between the door face and the wall to prevent it from sticking to the wall when spraying paint. When applying putty, be sure to apply it evenly and repair the nail holes on the door frame.
14、喷涂油漆。油漆喷涂效果会更加细腻一点,而细部可用刷子涂刷。
14. Spray paint. The paint spraying effect will be more delicate, and details can be brushed with a brush.
15、将锁安装到锁孔上,小心不要弄坏油漆。
15. Install the lock onto the lock hole, be careful not to damage the paint.
以上就是给大家分享的有关于门套的内容,希望我们的分享对大家有所帮助。本文由 不锈钢电梯门套 友情奉献.更多有关的知识请点击 http://www.sddtmt.com/ 真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
The above is the content about door frames that we have shared with you. We hope our sharing will be helpful to everyone. This article is a friendly contribution from stainless steel elevator door frames For more related knowledge, please click http://www.sddtmt.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.