济南诚耐

济南诚耐金属制品有限公司

不断发展技术力量、完善的设计服务团队,真诚为您提供的服务

全国咨询热线
15990909037
当前位置:首页 »资讯中心 » 行业动态 » 不锈钢电梯门套如何安装

不锈钢电梯门套如何安装

来源:http://www.sddtmt.com/ 浏览:发表时间:2022-12-31
(一)安装工具
(1) Installation tools
主要安装工具:电锤、冲击钻、汽钉枪、气泵、氩弧焊机、气瓶等。
Main installation tools: electric hammer, impact drill, steam nail gun, air pump, argon arc welding machine, gas cylinder, etc.
辅助安装工具:水平仪、垂直尺、铅坠仪、射钉枪及射钉、木工电锯、角磨机等,均采用国内产品,并定期到有关检验部门进行检验。
Auxiliary installation tools: level, vertical ruler, plumb bob, nail gun and nail, woodworking electric saw, angle grinder, etc. are all domestic products, and they are regularly inspected by relevant inspection departments.
安装工具的特点:准确率高,效率快,能适应各大型工程的不锈钢电梯门套的安装使用。
The installation tool features high accuracy and efficiency, and can adapt to the installation and use of stainless steel elevator door jambs in large projects.
(二)电梯门套的安装:
(2) Installation of elevator door pocket:
1、不锈钢电梯门套的安装工序:购买材料:15mm大芯板,九厘中密度板,1.15mm不锈钢板。
1. Installation process of stainless steel elevator door pocket: purchasing materials: 15mm large core plate, 9mm medium density plate, 1.15mm stainless steel plate.
(1)根据电梯门洞口尺寸下料:龙骨采用大芯板切割和面板。
(1) Blanking according to the size of elevator door opening: the keel is cut with large core plate and panel.
(2)分层安装龙骨和面板:把龙骨与墙固定牢。
(2) Install keel and panel in layers: fix keel and wall firmly.
(3)电梯门框上找2cm线。
(3) Locate 2cm line on the elevator door frame.
(4)在2200mm左右边水泥墙上安装间距≤500mm龙骨五处,下部距地面100mm,上部距顶端200mm,中间均与分布间距≤500mm;上部两处。
(4) Five keels with a spacing of ≤ 500mm shall be installed on the cement wall at the left and right sides of 2200mm, the lower part shall be 100mm from the ground, the upper part shall be 200mm from the top, and the middle part shall be ≤ 500mm from the distribution; Upper two.
(5)安装面板,调整好面板的水平度和垂直。
(5) Install the panel and adjust the levelness and verticality of the panel.
(6)把面板固定牢固。
(6) Fix the panel firmly.
2、电梯门套木龙骨框安装的允许偏差。
2. Allowable deviation of elevator door jamb wooden keel frame installation.
从造型上来看,电梯门套是比较多,而不锈钢这种材
From the perspective of modeling, there are many elevator door covers, and stainless steel is the material
以上就是为大家介绍的有关济南电梯门套上门安装详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sddtmt.com
The above is a detailed introduction to the door-to-door installation of Jinan elevator door jambs. I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.sddtmt.com