产品特点

　　Product Features

　　一、概述：

　　1、 Overview:

　　不锈钢玻璃门的应用是指感应探测器探测到有人进入时，将脉冲信号传给主控器，主控器判断后通知马达运行，同时监控马达转数，以便通知马达在一定时候加力和进入慢行运行；

　　The application of stainless steel glass doors refers to the detection of someone entering by an induction detector, which sends a pulse signal to the main controller. The main controller then judges and notifies the motor to run, while monitoring the motor speed to notify the motor to apply force and enter slow running at a certain time;

　　马达得到一定运行电流后做正向运行，将动力传给同步带，再由同步带将动力传给吊具系统使门扇开启；门扇开启后由控制器作出判断，如需关门，通知马达作反向运动，关闭门扇；

　　After obtaining a certain operating current, the motor runs forward and transmits power to the synchronous belt, which then transmits power to the lifting system to open the door leaf; After the door leaf is opened, the controller makes a judgment. If the door needs to be closed, the motor is notified to move in the opposite direction to close the door leaf;

　　不锈钢玻璃门，门体一般采用钢化玻璃，门体边框用不锈钢材质加固，加固后的门体更安全可靠，外观高档大气。

　　Stainless steel glass doors generally use tempered glass for the door body, and the door frame is reinforced with stainless steel material. The reinforced door body is safer and more reliable, with a high-end and atmospheric appearance.

　　二、特点：

　　2、 Characteristics:

　　安全性：电动感应门(电子感应门)碰到障碍物时门会自动反弹，并迅速打开，避免夹人事件和机组损坏现象发生。

　　Safety: When the electric responsive door (electronic sensing door) encounters an obstacle, the door will automatically rebound and quickly open, avoiding incidents of people getting caught and damage to the unit.

　　适用性：标准配置可连接多种附加配件，适用于各种场合、环境的需要。

　　Applicability: The standard configuration can connect multiple additional accessories, suitable for the needs of various occasions and environments.

　　节约性：可实现出入流量大小门开启适度的调整功能，以提高室内空气节率，节约能源。

　　Conservation: It can achieve moderate adjustment of the opening of the entrance and exit flow doors to improve indoor air efficiency and save energy.

　　可靠性：智慧型微电脑控制器，直接调节运行参数，动作指令确实，并具有自我学习功能，使得驱动装置运行平顺，安全可靠；

　　Reliability: The intelligent microcomputer controller directly adjusts operating parameters, ensures accurate action instructions, and has self-learning function, making the driving device run smoothly, safely and reliably;

　　方便性：电动感应门(电子感应门)良好的模块化设计，使施工非常简单。只需按说明把各种组件在动力梁上固定好，然后把电源和其它接口连接好，通电即可运行。

　　Convenience: The excellent modular design of the electric induction door makes construction very simple. Just follow the instructions to fix various components on the power beam, then connect the power supply and other interfaces, and power on to start running.

　　三、使用注意事项：

　　3、 Precautions for use:

　　不锈钢玻璃门在使用期间要定期清洁机箱内部的油污、灰尘 检查自动感应门各部件的磨损情况，检查自动门的支位偏差及螺丝松紧情况 检查皮带的松紧情况 检查控制器对电机输出、开关门宽度、速度、制动等情况 检查电压参数是否正常 ，维修、更换损坏的部件 。

　　Stainless steel glass doors should be regularly cleaned of oil and dust inside the chassis during use. The wear of various components of the automatic induction door should be checked, and the support deviation and screw tightness of the automatic door should be checked. The tightness of the belt should be checked. The controller should check the motor output, door width, speed, braking, and other conditions to ensure that the voltage parameters are normal. Damaged components should be repaired or replaced.

　　自动门由于受安装质量及使用环境的影响，使用过程中难免会发生问题。如果长期缺乏保养，导致自动门存在的隐患及小故障得不到及时处理，将会由小故障变成大故障，终可能导致自动门的瘫痪

　　Due to the influence of installation quality and usage environment, automatic doors are inevitably prone to problems during use. If there is a long-term lack of maintenance, the hidden dangers and minor faults of the automatic door cannot be dealt with in a timely manner, which will turn from minor faults to major faults and ultimately lead to the paralysis of the automatic door

　　本文由 山东不锈钢玻璃门  友情奉献.更多有关的知识请点击  http://www.sddtmt.com/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Shandong Stainless Steel Glass Door For more related knowledge, please click http://www.sddtmt.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.