门禁系统安装难点在于电锁的安装，装什么电锁主要由门决定。您在咨询电锁厂家客服时，客服都会问是什么门呢？按我们常用的门分类，可以分为玻璃门、木门、金属门。今天广州真地小编给大家分析分析，玻璃门应该安装电插锁还是磁力锁。

　　The difficulty in installing access control systems lies in the installation of electric locks, which are mainly determined by the door. When you consult the customer service of the electric lock manufacturer, they always ask what door it is? According to our commonly used door classification, it can be divided into glass doors, wooden doors, and metal doors. Today, the Guangzhou Zhendi editor will analyze for you whether to install electric plug-in locks or magnetic locks for glass doors.

　　电插锁暗装显得美观，可以实现180度内外开门，但不如磁力锁结实耐用，需要挖锁孔，施工安装比较复杂，可以用在以下3种玻璃门：

　　The concealed installation of the electric plug lock looks beautiful and can achieve a 180 degree inside and outside door opening, but it is not as sturdy and durable as the magnetic lock. It requires digging a lock hole, and the construction and installation are relatively complex. It can be used for the following three types of glass doors:

　　1、上下包边的玻璃门

　　1. Glass doors with upper and lower edges

　　上下包边的玻璃门，建议安装电插锁，不需要使用任何额外的配件，上门框的垂直厚度要＞4.5cm，因为电插锁是暗装，要将锁体埋入门框内，要求玻璃门上下有包边。

　　For glass doors with upper and lower edge wrapping, it is recommended to install an electric plug lock without the need for any additional accessories. The vertical thickness of the door frame should be greater than 4.5cm, as the electric plug lock is concealed and the lock body needs to be embedded in the door frame. The glass door should have edge wrapping on both sides.

　　2、上有包边下无包边的玻璃门

　　2. A glass door with a wrapped edge on top and no wrapped edge on the bottom

　　上有包边下无包边的玻璃门，上门框的垂直厚度＞4.5cm，建议使用电插锁，借助下门夹固定锁孔，电插锁锁体安装如上下包边的玻璃门安装电插锁的方法。

　　For glass doors with wrapped edges on the top and no wrapped edges on the bottom, if the vertical thickness of the upper door frame is greater than 4.5cm, it is recommended to use an electric plug lock. Use the lower door clamp to fix the lock hole, and install the electric plug lock body on the glass door with wrapped edges on the top and bottom.

　　3、上下无包边的玻璃门

　　3. Glass doors without borders on top and bottom

　　上下无包边的玻璃门，上门框的垂直厚度＞4.5cm，需要借助上门夹固定电插锁，下门夹固定锁孔。

　　For glass doors without edge wrapping, if the vertical thickness of the upper door frame is greater than 4.5cm, it is necessary to use an upper door clamp to fix the electric plug lock, and a lower door clamp to fix the lock hole.

　　比较大型的玻璃门可以安装磁力锁，足够结实耐用，上下包边的大型玻璃门看作是木门，要求门框超过门的垂面3cm以上，无须支架；当门框不够宽时，借助L支架拓展门框宽度，让磁力锁得以“挂起来”，内开门方向考虑美观，磁力锁借助LZ支架辅助安装，不用装在外面。

　　Larger glass doors can be equipped with magnetic locks, which are sturdy and durable enough. Large glass doors with upper and lower edges are considered wooden doors, requiring the door frame to exceed the vertical surface of the door by more than 3cm without the need for brackets; When the door frame is not wide enough, use the L bracket to expand the width of the door frame, allowing the magnetic lock to "hang up". Considering the aesthetic direction of the inner door opening, the magnetic lock can be installed with the assistance of the LZ bracket without being installed on the outside.

　　上有包边下无包边的大型玻璃门需要使用辅助U型支架。

　　Large glass doors with wrapped edges on top and no wrapped edges on the bottom require the use of auxiliary U-shaped brackets.

　　本文由  山东不锈钢玻璃门    友情奉献.更多有关的知识请点击  http://www.sddtmt.com/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Shandong Stainless Steel Glass Door For more related knowledge, please click http://www.sddtmt.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.